|
A dead soft, 3 mil aluminum foil tape that sticks firmly to its own backing. Good low or high temperature resistance, indoors or out. Used as a mask in electroplating and paint stripping to prevent edge buildup. Also used for general sealing & patching, for heat reflection and as a moisture barrier. |
| Backing | Dead soft aluminum, 3 mils |
| Adhesive | Acrylic |
| Total Thickness | 5.0 mils |
| Adhesion | 65 oz/inch width |
| Tensile Strength | 26 lbs/inch width |
| Elongation | 5.5% |
| Government Spec | L-T-80B, MIL-T-23397B, Amdt, 2 Type II |
Tape Storage & Usage:
Tape should be stored in its original packaging in a cool, dry area at a
temperature of 70F and away from direct sunlight. Surfaces to which tape
is applied should be clean, dry and free of grease, oil or other
contaminants. The product should be tested to determine the suitability
for its intended use.
customerservice@acutape.com
Acutape Corporation, 25 Perry Avenue, Norwalk, CT
06850 USA
Phone (203) 849-9875 Toll Free (800)
722-0133 Fax (203) 849-0765
(c) 2002 Acutape Corporation