|
Special electrolytic grade copper foil. This uniformily high tensile alloy with carefully controlled dead soft temper allows for good conformability to cut edges and cast surfaces. Resistance to the high temperatures of soldering. For use in such diverse applications as printed circuit board repair, electrostatic and RF shielding, the fabrication of stained glass, and as a flat, flexible conductor. |
| Backing | 1.25 mil copper foil |
| Adhesive | Acrylic (1.75 mils) |
| Total Thickness | 3.25 mils |
| Adhesion | 61 oz/inch width |
| Tensile Strength | 36 lbs/inch width |
| Elongation | 6% |
| Temperature Resistance | -40F to +250F |
| Release Liner | 83 lb kraft paper |
Tape Storage & Usage:
Tape should be stored in its original packaging in a cool, dry area at a
temperature of 70F and away from direct sunlight. Surfaces to which tape
is applied should be clean, dry and free of grease, oil or other
contaminants. The product should be tested to determine the suitability
for its intended use.
customerservice@acutape.com
Acutape Corporation, 25 Perry Avenue, Norwalk, CT
06850 USA
Phone (203) 849-9875 Toll Free (800)
722-0133 Fax (203) 849-0765
(c) 2002 Acutape Corporation