|
Thin, conformable 1 mil polyester film with 2 mils of pure silicone adhesive, providing good tack. For use where better resistance to chemicals and temperature is required. Performs well in acid or caustic chemical and milling baths and in longer plating cycles. Good all-around masking tape for plating and anodizing. Similar to our #781, but with slightly more adhesive. |
| Backing | Polyester, 1 mil |
| Adhesive | Silicone |
| Total Thickness | 3 mils (0.075mm) |
| Adhesion | 30 oz/inch width |
| Tensile Strength | 30 lbs/inch width |
| Elongation | 90% |
| Temperature Resistance | -60F to +350/400F |
Tape Storage & Usage:
Tape should be stored in its original packaging in a cool, dry area at a
temperature of 70F and away from direct sunlight. Surfaces to which tape
is applied should be clean, dry and free of grease, oil or other
contaminants. The product should be tested to determine the suitability
for its intended use.
customerservice@acutape.com
Acutape Corporation, 25 Perry Avenue, Norwalk, CT
06850 USA
Phone (203) 849-9875 Toll Free (800)
722-0133 Fax (203) 849-0765
(c) 2002 Acutape Corporation