|
Thin, transparent & conformable, this high tack 1 mil polyester film is coated with 1.5 mils of crosslinked silicone adhesive. Exhibits excellent temperature and moisture resistance. Performs well in acid or caustic chemical and milling baths. Good all-around masking tape for plating and anodizing. Also works well as a mask in powder coating and paint baking where temperatures reach 400F for up to 30 minutes. |
| Backing | Polyester, 1 mil |
| Adhesive | Crosslinked Silicone |
| Total Thickness | 2.5 mils |
| Adhesion | 40 oz/inch |
| Tensile Strength | 35 lbs/inch |
| Elongation | 130% |
| Temperature Resistance | -60 F to +350/400 F |
| Dielectric Strength | 5,400 volts |
Tape Storage & Usage:
Tape should be stored in its original packaging in a cool, dry area at a
temperature of 70F and away from direct sunlight. Surfaces to which tape
is applied should be clean, dry and free of grease, oil or other
contaminants. The product should be tested to determine the suitability
for its intended use.
customerservice@acutape.com
Acutape Corporation, 25 Perry Avenue, Norwalk, CT
06850 USA
Phone (203) 849-9875 Toll Free (800)
722-0133 Fax (203) 849-0765
(c) 2002 Acutape Corporation